Hi
When disconnected from Shore Power - and with the EasyPlus switched fully ON - the product Inverting LED is show green (ON) - all the time - even with no loads attached to the AC side. And, my BMV is showing 0.95A draw - but with no loads (on the AC side or on the 12v side) attached.
However, before I installed the BMV, the green inverting LED would stay off, and the draw was less, and when I connected a load on the AC side there was an audible click, followed by green LED coming on.
Since installing the BMV, the green LED is on all the time - and the EasyPlus seems to be inverting permanently - even though no AC loads are connected.
Help ?!
Thanks.