question

kylepaulin avatar image
kylepaulin asked

Phoenix multiplus 12/3000/120 remote ON/OFF

I have a Phoenix Multiplus 12/3000/120. This specific model https://www.victronenergy.com/upload/documents/Manual%20-%20MultiPlus%203k%20230V%20Ve.Bus%20enabled%20-%20rev%2000%20-%20EN%20NL.pdf


is there any way to separately control the charger and inverter for a two signal BMS like on the new models?


thanks for any help.

chargerPhoenix Inverter
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Barry Timm avatar image
Barry Timm answered ·

Yes. I do exactly this with my Electrodacus BMS managing the charging and inverter functions separately on my Multiplus 24/3000 since early 2020. You have to install and configure the 2-wire BMS Assistant software on the Multiplus.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Phoenix Inverter product page

Phoenix Inverter Smart product page

Chargers.

Additional resources still need to be added for this topic