Hi,
My system is in a motorhome, quattro , connected using a ccgx and 2 lithium smart batteries , with theVictron VE bus BMS
I have updated my quattro to the lastest firmware using my mk3 usk and android phone and victron connect app.(so i can access setting on the move if required)
This re sets the inverters settings so i needed to re-do them. I did what i could using the connect app.
I can do all the settings via the app except assistants.
So my CCGX is showing No BMS ERROR
I need to run the BMS assistent for my VICTRON smart Lithium batteries. This is by default not loaded so i went onto my Victron VRM portal , downloaded the Quattro settings as normal but VE confgure will not open the file giving the following error
The file does not contain all required information. (file probably created with an older version of the Venus.OS)
Everything is up-to date.. Ve config 3 , the CCGX and the Quattro But i need to bms assistant to be running and if i can't open vic config 3 i cant add the assistant.
I tried uploading my old saved file but the CCGX / Quattro wouldnt accept it ,
Is there something i am missing should i be downloading the inverter settings via the vrm with the bms or batteries discconnected? or is the fact that i updated the inverter settings via the connect app mean i now have no access via ve config 3 ?
Your help would be appreciated.
JAY