question

jonsouch avatar image
jonsouch asked

Help with understanding CAN bus MPPTs connect and display

Hi, I have 4 Smart MPPT 150/70 Can Bus connected together, they are charging fine as a Total input from my panels on the BMV but the CCGX only shows the Watts from one of the MPPT's.

Cannot understand the complete lack of settings out there on how to actually setup the latest VE Can Victron MPPT's, with a Victron Multiplus, Victron BMV and Victron CCGX, I have got it working in a fashion but as you can see from above not quite right.

Any help would be much appreciated.

VE.Can
5 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Mark avatar image Mark ♦♦ commented ·

Can you describe/confirm how you have the 4 MPPT units connected together and to the GX device?

0 Likes 0 ·
Show more comments
2 Answers
Matthias Lange - DE avatar image
Matthias Lange - DE answered ·

Have you plugged a terminator into the last MPPT and the 2nd Can-port of the CCGX?

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

jonsouch avatar image
jonsouch answered ·

Hi, I can confirm yes I have.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic