hi i have the CanGX display can i use this with the Cerbo GX or do i need to get the GX touch 50
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
hi i have the CanGX display can i use this with the Cerbo GX or do i need to get the GX touch 50
@Stavarda there are quite a number of differences really; whether they will be particularly relevant to you in particular just depends on your use case. Check out the full comparison chart here: https://www.victronenergy.com/live/venus-os:start
@Stavarda, the CANVu is not compatible with the Cerbo GX; you will need the GX Touch 50 display for the touchscreen functionality. It's worth noting that the Cerbo's display port is a standard HDMI, so you can technically connect just about any standard monitor that uses HDMI, but of course you lose the touchscreen functionality of it. For full functionality, you need the GX Touch 50 display.
Apparently a regular HDMI monitor and a USB mouse can be used. YMMV though.
19 People are following this question.