question

joachimse avatar image
joachimse asked

Multiplus shuts down connected shore power

Suddenly I have a problem when connected to shore power. The multiplus 3000 shuts down, with no led error code. It tries to start again but stops a couple of seconds later. AC in is measured ok, so no problem with the shore power.

When running on engine or generator the the multiplus works fine (both charger and inverter)

Any ideas?

Kind regards

Joachim

Multiplus-II
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Daniël Boekel (Victron Energy Staff) avatar image
Daniël Boekel (Victron Energy Staff) answered ·

Hi @Joachimse

What do you see when you have VeConfigure or VictronConnect open and computer connected to the Multi with mk3 cable?

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

joachimse avatar image
joachimse answered ·

I have not been able to connected with mk3 cable yet, but I will post my findings when this is done.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.