question

cavitt avatar image
cavitt asked

Easy Solar Not charging

Hi All, I have got a Easy Solar 24/3000/70 with the MPPT150/70 in it. I installed it just over 3 months ago and it's been working fine. This morning I find that according to the GX Screen the MPPT isn't charging at all (Not showing any power from the PV array and if I go into the settings for the MPPT it says it is "Off") however if I connect via Blue tooth it appears to be working fine. PV Voltage of 84.5v PV Current 14.5A @ 1250w, Battery = 26.55v Current 47.3A bulk Charging.

The GX Screen shows 0w from the PV, Battery voltage of 24.2V -14.2A @ -350w

Any Thoughts?

MPPT Controllersbattery charging
1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

cavitt avatar image cavitt commented ·

I forgot to say that there are no errors showing on the controller...

0 Likes 0 ·
2 Answers
Matthias Lange - DE avatar image
Matthias Lange - DE answered ·

I would try to reboot the CCGX (pressing the two upper round buttons together) and/or unplug the MPPT and plug it in again.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

cavitt avatar image
cavitt answered ·

Thanks M.Lange. The screen reboot did the trick... Any thoughts on why this happened? Should I be worried about it happening again or failing completely?

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

MPPT Product Page

MPPT Error codes

MPPT 150/60 up to 250/70 Manual

Additional resources still need to be added for this topic