Hello.
I have a MultiPlus 12/2000 in our RV. We have an imbalance issue with our lithium cells that causes an overvoltage condition when absorption charging. Obviously this is not an issue when inverting off the house bank, but connecting to shore power and setting the inverter "On" (in order to energize the relay that connects the MP's AC input to the AC output) also inevitably turns on the charger, eventually tripping the OV relay and shutting down the whole rig. The cell balance issue will get resolved in time, but meanwhile I would like to be able to use shore power.
I see that someone else asked about this issue here, and was told they could use an assistant to set the charge voltage to 0V. I looked in VE.Config and found the "charge current assistant". This seems to allow me to set the charge current to 0V, but also allows "disabling the charger when the charge current should be zero". Does anyone know whether to check this box; i.e., whether disabling the charger would also disconnect the passthrough relay?
Thanks!
/afb