My batteries in trailer RV are in boxes but are not sealed, will see road spray when traveling in wet conditions - is the Smart Sense waterproof?
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Please define "water resistant". I did describe what this unit will be exposed to, please give me your opinions on whether it will take it or not.
If its potted the potted elements will be water resistant (without defining what it means strictly). It doesn't mean water can't get to unpotted internal terminations etc.
The product doesn't have an IP rating as far as I can tell so regardless of forum responses the datasheet/manual is implicitly telling you to provide a benign environment.
That being said, the original quote was from Johannes who is Victron staff, so you're probably ok - without any guarantees.
If it were me I'd ensure that there is some form of physical barrier to prevent water being driven directly at the unit, ensure there is drainage so water can't pool around it, and take it for test runs.
Hi Brenneke,
The black model is water resistant.
I don't know if the long range blue model has the same rating.
I would guess the blue model would be built the same. Where did you get this info about water resistant? I have not been able to find anything whatsoever on water resistance.
Hi Brenneke,
The info is from the manual in the comments section, and refers to the black SBS.
You have the blue SBS? Is the case filled up with epoxy (potted)?
Additional resources still need to be added for this topic
12 People are following this question.