I have a MPPT150/85-MC4 that specs say it can handle 1200 watts and deliver 85 amps. I have 1800 watts of panels. Will I ruin the controller when these panels go to full power or will it bleed off the excess?
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
I have a MPPT150/85-MC4 that specs say it can handle 1200 watts and deliver 85 amps. I have 1800 watts of panels. Will I ruin the controller when these panels go to full power or will it bleed off the excess?
As long as the PV short circuit current is less then 70A (max. 30A per MC4 connector) and the max. PV voltage (at coldest conditions) is less than 150V, everything is fine.
Datasheet:
"If more PV power is connected, the controller will limit input power. "
Additional resources still need to be added for this topic
11 People are following this question.