This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
I have fitted a 12 12 30 (Smart) to my caravan to charge the house battery and help with the fridge load using the tow vehicles alternator.
The Smart version is great with programmable voltage sensing capability but 30a is just too high for the wiring I have and the distance it travels. I believe the 18a equivalent would be ideal but they don't appear to be available at the moment (at least in Australia).
Is it possible to cap the output amperage?
Thanks in advance.
Thanks WKirby.
Is it possible that future firmware could have an option to limit the output?
I have enquired about the 12 12 18 Orion TR Smart through a couple of sales centres in Australia and they have advised they are currently not available (no timeline given for availability) and that Victron are advising that the 12 12 30 is an adequate replacement - which in my application, I am finding it isn't.
I just bought a 12|12 30 and presumed that I would be able to configure it to limit the current if 30A was too much for my alternator.
It's a shame to find out that there is no way to limit the current.
Perhaps Victron could consider adding this option in a future firmware update.
Have you considered the older product non smart Orion Tr 12 12 9 or 12 12 18?
Unfortunately, it is not possible to adjust the output current limit.
