Hello Everyone,
I am planning out my victron build for a small offroad Caravan and just want to know a few things,
I want to put a 12/1600/70 Inverter Charger in to handle all the 230V GPOs and AC charging,
Ill also have a BMV712 and a Digital Multi Control 200/200A wired via the bus port
I am hoping to wire the relay in the BMV712 that at 50% SOC it will switch off the inverter, this way it doesn't accidently get left on with heavy loads.
Now my question is, is the above possible but also, will the BMV relay override the Digital Multi Conttrol?
Example 1 i can think of
Plugged into site power, running AirCon at 1200 Watts, The Multi Control is set to "On"
Someone unplugs or trips on the cord, Inverter switches over and now runs the load fine,
No one notices, so battery SOC drops to 50% BMV relay activates, telling the remote on/off to be off,
Will the BMV relay win over the MultiControl that is still set to "on"?
Thanks,
