Hi
I have an installation with a MPPT 110|50 Solar Controller connected to a Venus GX via VE.Direct. I would like to add a battery monitor to this installation however the 24VDC battery bank comprises two banks. Due to wiring and regulation constraints I am going to need to install two BMV-712 monitors and shunts. Can anyone please tell me the best way to connect these two monitors to the GX with the remaining ports I have.
I also noticed in other posts that only one bank would be able to be displayed via the GX using VRM or local access. Is my interpretation of these posts correct ?
Thanks for any help you may be able to offer.