My BMV712 has stopped working. I suspect the fuse may have gone. What rating is the fuse so I know what to replace it with?
Thanks very much,
Tom
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
My BMV712 has stopped working. I suspect the fuse may have gone. What rating is the fuse so I know what to replace it with?
Thanks very much,
Tom
@t0mb0, T1AL250V
If replacing the fuse doesn't work, get in touch with your distributor and they'll have a troubleshooting protocol for the BMV/shunt PCB/display head.
I'm wondering about your answer, Justin. My 712 came with 100mA fuses, not 1A. The T1AL250 is a 1 amp fuse. Is there something I'm missing? (I came here because I blew one of the 100mA fuses too and needed more info about the fuses.)
@I8DBBQ, The original 100mA fuses should be replaced with a 1A fuse; since the original shipments of those it's been found that the 100mA fuses are prone to voltage drop and other issues over the course of their life, so they should be replaced with the 1A fuse.
16 People are following this question.