question

elvistherv avatar image
elvistherv asked

Advice: Add additional solar on Cargo Trailer to existing RV system

So I've got an American Diesel Pusher RV with Quattro, CCGX, BV 512 860Ah of LA batteries (12v), the RV currently has solar (8 panels I think) with a third party MPPT charge controller (80A) and an Onan Genny.
The CCGX is connected to a local WiFI network that is internet-connected.


Ultimately I plan to get licensed to tow behind the RV then get an enclosed trailer to tow my pickup behind the RV.

The RV roof is already pretty full so I was thinking that I would have space on the roof of the trailer to add panels, my question is: What is the best way to add these to the system?

a) Run wires from the panels to the RV charge controller?

b) Add another MPPT controller to the trailer and 12v wires to the battery bank?

c) Add a 240v inverter and wire to the Quatrro somehow?


Option c) sounds like the most interesting but what inverter and how do I wire it in?


(Of course, I'd really like to have all of this tied into the rest of the eco-system CCGX, etc.)

BMV Battery MonitorCCGX Color Control
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Justin Cook avatar image
Justin Cook answered ·

@ElvisTheRV, a lot of answers depend on variables that you didn't provide, such as the actual specs for the panels you have on top of the RV and that sort of thing. Let's assume for the moment, however, that adding more panels to your existing controller very possibly isn't going to do you any good because it's very possibly already about maxed-out as far as the wattage it can handle.

Having made that assumption, then, the simplest solution for you would be to install another SCC in the coach, parallel-connected to your existing battery bank, and run wires from your (theoretical) new PV panels on top of your trailer to the new SCC in your coach.

The reason you'll want the new SCC in your coach and the panels on the trailer running to it rather than the SCC on the trailer is that the cabling from SCC to battery needs to be heavier-gauge than PV panels to SCC, since the wires between PV and SCC are carrying high-voltage low-amperage current whereas the SCC to battery cables are carrying low-voltage high-amperage current. Thus you want to keep the SCC to battery cabling as short as possible.

I'm not sure what you're thinking about when you're musing "add a 240v inverter and wire it to the Quattro somehow" because the Quattro is already an inverter... and an inverter has nothing to do with your solar panels, so what's your line of thinking there?

2 comments
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

elvistherv avatar image elvistherv commented ·

Regarding the specs on the panels I am also a little unsure of that, I thought as much re: placement of SCC due to the voltages involved, is another option to swap out the existing SCC for a larger one rather than running 2?


My thinking on the PV inverter was based upon the use of Fronius PV inverters, which many Victron systems (including quattros) use, from the trailer panels but (as is clear) I'm a little hazy about how they would work with the quattro.

0 Likes 0 ·
Show more comments
Tom avatar image
Tom answered ·

Possibly your PV on the trailer will be different sized and powered on the trailer. With this in mind you should add a second Mppt charger near your main house battery bank and add a second charging connection to the battery. Run your PV DC cable to the back if your RV and use an Andersen battery connector sized for your amperage.

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.