Hi
I have 2 BYD 2,5kWh modules, that each have a 35A Charge Current Limit (CCL) and Discharge Current Limit (DCL), therefore, I would expect to see a continuous 70A CCL/DCL for my system.
However, according to VRM, my CCL/DCL are always fluctuating between 35A and 70A:
It's like this since I installed the system (a few months) and has no noticeable impact in performance (I seem to be able to pull ~50A from the battery, even when the DCL drops to 35A):
Any idea on what's going on?
BYD B-Box Pro firmware 4.17
Multiplus II 3000VA firmware 459
CCGX firmware 2.42