Hello everyone.
Set up is this:
BMV712
Venus GX
Old model of Multiplus
Kohler 5kW marine Generator
I would like to automatically start the generator if the voltage drops bellow 12.00V.
The problem is that the generator requires a momentary short to start and to stop, but BMV712 can only do relay closed to start and open to stop. If i wire it to the generator as is the genset will start and immediately stop.
1. What do I need to translate open/ closed relay of BMV712 to momentary impulse to start and to stop?
2. Can Venus GX send a momentary signal?
3. Is a newer MUltiplus able to do momentary signal to start and stop the genset?
Thanks