Hi,
I convert my 24 Volts of my Batterie in 12Volts with two DCDC Converters.
In my OffGridSystem I use 3 different DC Circuits
- - 24 Volt Circuit directly connected to the batterie for Camping-Fridge and some 24 Volt Camping equipment
- - 12 Volt Circuit (max. 120 Watts/10A ) just for LED-lights and small consumers.
- - and a 12 Volt Circuit (max.480 Watts/40A) for some Camping kitchen tool, Computer Chargers and other rather high Wattage Consumers.
With an BMV hocked to my CCGX I would have an overview about all consumed Energy.
But I’d love to log the Wattage of all 3 Circuits separate to find the Energy-Suckers in the System, and make Energy optimization, and potential Cut-Off (in case of low Battery and no PV Charge)of one DC Circuit more easy.
I think a possibility would be some kind of VE.Direct compatible Shunt, or DC Energymeter, that does not just Sum up to one “DC Load” in the CCGX.
Or is there an Orion DCDC Converter planned in near future that has VE.Direct and Logging features and for sure accuracy in Energy measurement. -->That actually would solve the whole Topic with one Device.
Any other ideas how i could measure, log, and Display 3 different DC Circuits with the CCGX ?
Greets and Thanks
Gernot
