This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
I have two 100/35 Charge controllers feedingf two Solar panel banks a battery. I went on holidays last week and suddenly there was no out put from one of these charge controllers. On my return I found the inactive controllers has 3 LED lights on non flashing. What does this mean
Thanks that did the trick.
You were right it was 100/30. and the firmware is V1.16 is this current?
Could you give me a link to all firm ware updates and I will update the other components.
The current version is v1.37
How are you connecting to the MPPT? The VictronConnect software or app should download and update to the latest version for you.
The two charge controllers and the inverter charger are all connected to the color controller by cable and the color controller connects to the internet by wireless.link to my modem
Is your installation connected to VRM? If so, you can update the firmware of the chargers from there.
From VRM, on the "Device List" page there is a "Firmware Update" button at the bottom of the page.
I don't want to sound pedantic, but I'm unfamiliar with a 100/35. Do you mean 150/35 or 100/30? Just want to be sure which product we are talking about.
What firmware version are you running?
Having said that, I'm pretty sure that the LED codes are universal. 3 Solid LED's mean the device is starting up - indeed.
Have you tried a full reset, disconnect Battery and PV and leave for 3 minutes?
