I have a Raspberry Pi working well with Venus OS. I would like to control it from another RP. I have good WiFi or Ethernet to both. Is VNC the way to do this? If so how to I get VNC on the Venus OS RP?
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
I have a Raspberry Pi working well with Venus OS. I would like to control it from another RP. I have good WiFi or Ethernet to both. Is VNC the way to do this? If so how to I get VNC on the Venus OS RP?
hi! Vnc is already on there, see Remote Console in the ccgx manual.
Hi mvader,
Thank you for responding to my question. Do I have to use the VRM to do this?
This house has bad internet so I would like to have the RP in the house look like the one in the power room where the RP with the Venus OS software is getting its information from the other Victron devices. I would be much faster if I don't have to use the VRM - Correct? Thank you, John
Additional resources still need to be added for this topic
Raspberry Pi running Victron’s Venus firmware - Blog Post
Venus OS Large image: Signal K and Node-RED - Install
raspberrypi install venus image
12 People are following this question.