Is to possible to send GPS & tank data from NMEA2000 to VenusGX. Also is it possible to send tank level data from Venus GX to NMEA2000?
asked
NMEA 2000 & Venus GX Compatibility.
Hi Chris,
GPS data to Venus GX: no
Tank data to Venus GX: yes
Tank data from Venus GX: no.
we did recently add sending out battery monitor data & inverter/charger data, thats now being tested and will be available officially soon.
all the best, Matthijs
Hi! Has any news about transferring tank data from Venus no N2K? Very needed!
Yes, its currently in beta.
See pinned post at the top here:
Thanks Matthijs. We have experimented sending tank data to the Venus / Color control with mixed results, Maretron worked fine, but simulated tank data didn't appear. It would be really good for Marine installations if this data was available to both systems. Is there any chance this might be a future development? The Victron app on the Raymarine display is a fantastic step forward.
All the best
Chris
Hi Chris,
i dont know what you mean with simulated tank data?
Hi Matthijs,
We have a device that simulates NMEA data for our displays in the workshop it generates standard PGN's for all kinds of data from GPS to engine and tank data. This way we have an NMEA2000 network full of data to display. The Venus does not seem to display the tank data. We can disconnect this and add real tank senders into the system. The Maretron worked OK but if I remember the Oceanic System one did not display. However this was a while ago on the Color Control.
Just one more question on the GPs, could we feed GPS position from NMEA2000 into the USB port on the Venus if we used an Actisense NMEA2000 to USB converter.
Thanks
Chris
