This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
I have a Multiplus 800/12/35 and I am currently following the Victron van install schematic. On the schematic I notice that there isn't a separate power switch for the Multiplus from the Lynx distributer - but from what I have seen before it seems to be quite common for people to add one there.
Does the Multiplus need it's own power switch, or is the switch on the unit suffice?
Many thanks,
Hi
That switch is only soft off switch, if you are talking about a DC battery switch yes it would be a good idea and maybe a AC output master switch or Circuit breaker.
Regards
Rob D
NZ
A switch on the DC battery path should be accompanied with a precharge circuit to ensure you're not arcing across the switch contacts when using that switch.
Imo, its better to use the panel switch on the multiplus for "normal" usage. The external DC switch is generally used for isolation/fault finding/long term storage purposes. Depending on where you are, electrical standards may require a switch at the battery regardless.
