The Bmv-712 jumps to 100% SOC from about 40-50% as soon as the solar panels start changing a couple of wats
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
The Bmv-712 jumps to 100% SOC from about 40-50% as soon as the solar panels start changing a couple of wats
Hi @Christian K, that sounds like the BMV is not set up correctly. You need to set the Charged voltage to 0.2-0.3v lower than your absorption voltage, and also pay attention to these settings: tail current, peukert factor, charge efficiency and charge detection time
I think my settings was not saved. Hopefully it will work tomorrow.
10 People are following this question.