But the batteries are charged
Configuration: Easysolar 3Kv (Multiplus 48/30000 + MPPT 150/70 + 2 Pylontech US2000plus as an offgrid system) I had it installed with BMS managed by the batteries (CAN.Bus/DVCC...)
One day I switshed the inverter off and after that I noticed that it doesn't start again Showing low battery :-0. Only if I connect the generator it comes back to live...
Just to see were I am I went back to first running setting: BMS automaticly managed by the MulitPlus ...deactivated the DVCC, CAN ect. (MPPT error #67, reseted MPPT) still no change.
In the VRM the low battery is displayed as VE.BUS error.
Any suggestion? THX