Hello everyone,
I'm using 3 MultiGrid and Pylontech Battery without any load at the output. This setup has no particular purpose at this moment, but my task is to prepare a GUI for a communication between the Venus GX and a PC using Modbus. So I use ESS Mode 3. I'm frequently switching between ESS Keep Battery Charged Mode (to charge the battery when I'm away) and ESS External Control (to test and to run my Modbus GUI).
Both modes ran perfectly for about a month, which means I could charge and discharge the battery with energy from/to grid through Modbus communication. Until one day, on which the settings in MultiGrid might have been changed. Since that day, both modes don't work:
In ESS Mode 3, Venus GX doesn't react to the setpoint I sent, but data such as battery SOC can be read as usual. In Keep Battery Charged Mode, the battery is not charging, and most confusingly, these LEDs Mains On, Absorption and Inverter are on at the same time.
I've used Victron Toolkit App to understand this LED combination, but this combination is not available both in the app and the manual. How can these problems, or most importantly, the Keep Battery Charged problem could be solved?
Your help is highly appreciated. Thank you.
