This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hello everyone,
the manual says "off load current" <80mA.
I understand that's with the unit 'on' but no load connected.
But what's the quiescent current when unit is off by remote switch function (L/H pins)?
Looking forward to receiving your replies cheers!
@Peter Bris, I have a 24/12-30A model on my test bench right now and can verify that with remote jumper removed or manually switched, the unit is fully off, no measurable draw at all. I will verify this upon our receipt of the 12/12-30A units (we had to wait for them a while here in the US) but I would not expect that to be different.
@Justin Cook thanks for that.
Unfortunately these smart Tr 12/12-30's don't seem to be available anywhere including my neck of the woods (Australia).
@Peter Bris Just be patient a little longer... we'll be getting our first shipment of them fresh off the boat within the next 30 days or so (we're in California) and should be pretty much the first distributors outside of Europe stocking them. I'd say by the end of Feb/ mid March they'll be all over the place.
...that's not just hearsay either, we literally have tracking of them on the boat :-P
This supplier in Oz lists them as 'in stock', but 'contact us' first. Maybe on the water? The price is in AUD, which hasn't the value of USD. (Unfortunately)..
