Hi All
I have just fitted a victron system in my latest van conversion and it causing me a few headaches.
Any help is very much appreciated first let me give you the low down on what i have fitted.
Easyplus compact 12v 1600 inv charger
lithium 160 ah smart battery
V E bus BMS
12 65 battery protect
cyrix li charge
smart mttp
712 battery monitor
ccgx colour control
all components are at the latest firmware.
The issue is when running from the battery with the inverter and say im using a coffee machine rated at 1300 watts the dc cuts out a few seconds after the coffee machine is switched on then the ac cuts out. The dc switches back on a few seconds later.
I am presuming this is the battery protect kicking in and out the question is why is it doing this ?
I am new to installing a more advanced system and still learning .
Cheers in advance