question

bobybayo avatar image
bobybayo asked

Victron Quattro not working after Overload Warning and others

I have 2 Quattro 5000 in 180 degrees split phase configuration. Last night, after I turned on the AC unit, the system shut down. I tried to restart the system but one of the inverters make a sound and lights the overload light. There is no load connected since everything is off. I check the alarm history and there was:

overload L2 warning

low battery on ve.bus system

ve.bus error 10:system time sync

recovery

then a DC Ripple warning

recovery from ripple

the question is, how can I reset the second “still overload” inverter? or it got damaged?


MultiPlus Quattro Inverter Charger
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
bobybayo avatar image
bobybayo answered ·

In addition, i tried to use Victron Connect app to configure the inverter and the app could not find the inverter. I was able to configure one of the inverter to have power on 1 phase of the house while I figure out what os happening with the other inverter.

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

bobybayo avatar image
bobybayo answered ·

See photo of current status. Updated firmware but no change Is there any way to reset???

img-0482.jpeg


img-0482.jpeg (7.3 MiB)
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.