question

cedar22 avatar image
cedar22 asked

Connecting Pytes V5 to Cerbo GX questions

Good day.

I'm trying to confirm how to connect these two components. The Pytes manual talks about needing a custom Ethernet cable to connect to the cerbo. Can anyone confirm that's the case for the V5?

Also I was wondering if there are any additional settings I need to configure on my 250/100 or MultiPlus or does the Cerbo look after handling charge parameters for the V5 once its connected?

Please let me know.

Thanks

Multiplus-IIcerbo gxMPPT SmartSolar
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
nickdb avatar image
nickdb answered ·

Have you read the victron/Pytes setup doc?

https://www.victronenergy.com/live/battery_compatibility:pytes


2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

cedar22 avatar image cedar22 commented ·
I have a few times. Still uncertain on proper cable type that works with the V5 and Cerbo.
0 Likes 0 ·
Show more comments