question

todcamper avatar image
todcamper asked

MPPT 100 30 UNABLE TO CHANGE BLUETOOTH PIN

on first startup I chose not to change Bluetooth pin as it said I could do it later, in product info there is supposed to be a change pin option but mine does not have it, I have tried forgetting device, I have tried forgetting Bluetooth device in my phone, I have powered down solar and batteries disconnected but nothing will let me change my Bluetooth PIN it remains at 000000

Bluetooth
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Alexandra avatar image
Alexandra answered ·

@Todcamper

Have you updated firmware? Or which firmware is it on?

The instructions are here for the pin change.


2 comments
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

todcamper avatar image todcamper commented ·

The firmware is the latest update, as I said in my question there is not any change pin in product info


0 Likes 0 ·
Alexandra avatar image Alexandra ♦ todcamper commented ·

A firmware update does not change the pin code. To do that you either need the puk or follow the instructions on the page linked. Changes the the pin are same across almost all the devices.

0 Likes 0 ·
Thiemo van Engelen (Victron Energy staff) avatar image
Thiemo van Engelen (Victron Energy staff) answered ·

Hi @Todcamper

Can you post a screenshot of the product info page?

Perhaps you just need to scroll down on that page? At the top it shows the MPPT part and further down the page it should show the internal bluetooth dongle with the option to change the PIN code.

Kind regards,

Thiemo van Engelen

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.