question

graham-willsher avatar image
graham-willsher asked

Fronius control via Victron Venus OS and NodeRed

Good Morning,


I am looking at using a Fronius Primo Gen 24 Plus inverter and a Victron Multiplus II GX.


I know that they play well together, as the Fronius appears in the Victron VRM, and there is a joint webinar of the interoperability of these two manufacturers by Fronius/Victron.


What I am trying to find out is if any of the Fronius functionality is available within the Victron Venus OS (NodeRed) for control/programming purposes, on the same lines that you can run Nodered scripts to control the Multiplus's?


Any help or guidance would be appreciated.


TIA,


Graham.

Multiplus-IINode-REDFronius
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Alexandra avatar image
Alexandra answered ·

@graham Willsher

Yes there is a way to control a fronius using node red. I haven't tried with a Gen 24 but have a primo.

The newer firmware on venus os large already has some built in.

FYI modifications has moved to https://victron.discourse.group/

2 comments
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

graham-willsher avatar image graham-willsher commented ·
Hi @Alexandra ,

Thanks for the rapid reply. Hopefully it will have everything that I need in there.

0 Likes 0 ·
Alexandra avatar image Alexandra ♦ graham-willsher commented ·

@graham Willsher

Currently playing with the power limit node (under victrons palette) and some math nodes using information from loads etc.

0 Likes 0 ·