question

robertlarsonsf avatar image
robertlarsonsf asked

VE.Direct to Bluetooth Smart dongle and Axiom Pro 9

I have two VE.Direct to Bluetooth Smart dongles ... one for the battery monitor and one for the solar controller. I use both my Android phone and my iPad to run the apps to monitor those devices.

I have just installed an Axiom Pro 9 and would like to display the data on my Axiom Pro 9. While it does seem that a wired connection is feasible (wired, not bluetooth), I was wondering if an Axiom app might be in the works for the dongle.


Thanks,

Robert

Bluetooth
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Daniël Boekel (Victron Energy Staff) avatar image
Daniël Boekel (Victron Energy Staff) answered ·

Hi @robertlarsonsf

No, you'll have to use a GX device to connect them to the MFD:

https://www.victronenergy.com/live/venus-os:mfd-raymarine

You can then also view everything via the VRM app on your phone.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.