question

swapper avatar image
swapper asked

Multiplus II GX AC Loads

Hello.

I have a Multiplus II GX with critical loads in AC-out-1, and noncriticals in AC-out-2. I have a meter between Grid and AC-IN, and nothing in parallel with the Multiplus.
The AC Loads graphics does not show relevant information (only the Critical Loads graphic), so it can be deactivated?


ac
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
nickdb avatar image
nickdb answered ·

Yip, If you don't have parallel loads the meter and "has ac loads" options in ESS settings can be disabled.

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

swapper avatar image swapper commented ·

I see a "Has DC system" option, but not a "has ac loads" option, where is it?

0 Likes 0 ·

Related Resources

Additional resources still need to be added for this topic