This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
I have an issue with staying connected to my servo GX once the sun goes down. I lose my Wi-Fi connection for some reason and then I have a hard time getting it back in the morning until late morning early midday my Wi-Fi connection is good to the servo GX, please help
The thought that comes to mind is the power to the GX and/or the WiFi Router is connected to the LOAD output of a solar controller and that is configured to be active only when there is a PV voltage present.
I changed the hookups going straight to the batteries now. So here’s 2 things I have for y’all. So my system is in my garage. My garage is not attached to my house, I have a Wi-Fi booster/extender on the outside of my house facing the garage. Normally, I have absolutely no issues with this with my TV that I have out there which I have Roku on, as well as my phones, however, when I close my garage door, which is thin aluminum, I lose signal. Then the only way to reconnect to the Wi-Fi I have to unplug the power source from the Cerbo GX And then it will reconnecttothe Wi-Fi rinse and repeat every day. I understand that I need to do some thing about keeping the Wi-Fi connected, but why do I need to disconnect the power from the Cerbo GX every time in order for it to reset?
