good morning everyone, even though I have set the recommended parameters, the regulators refuse to do the absorption phase. Do you have any ideas?
thanks a lot
asked
Mppt 250/100 tr ve can x2
@Emanuele trusso Do you have any ideas?
You could use a few more words to describe your problem.
the problem would be that my battery pack skips the absorption phase with the parameters attached below.
the battery pack is free acid heavy traction model for forklifts 500ah 2v x 24 cells.nba.
I tried without load on the inverters without success, even without cerbo and link schunt but nothing.
thank you very much for your availability
Lynk schunt 500ah 58.5v 45% 4% 3min 1.25 95% 0.10A 3min
Mppt Smart solar 250/100 tr ve can -----modality BatteryLife
System 48v Absorption 62v---Manteniment 58.8v----
Compensation 63v(disabled)
Duration Absorption Adaptive 30Min 2A
you have an update 3.16 I think that should help you
I updated to 3.16, but now it gives me a communication error 66, even checking that the loaded parameters are identical...it's a puzzle
Here is an exchange on another forum that should help you HERE
