question

davidtudor avatar image
davidtudor asked

Solar Panel Charging

I think the bottom solar has a issue they are all 7 panels on each solar string and ran in series to keep the amperage low but voltage high, but the last one never seems to move up to 1 amp, always seems low but voltage is high, i am trying to add a picture but seem to be having faults on adding photo.

Solar Panel
2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

davidtudor avatar image davidtudor commented ·
using MPPT 450/100 RS


Solar 1 191.8Volt 8.23A

Solar 2 222.0Volt 8.23A

Solar 4 190.5Volt 5.27A

Solar 5 293.2Volt 0.22A This is the one i think has issue?


0 Likes 0 ·
Alexandra avatar image Alexandra ♦ davidtudor commented ·
@davidtudor

Best way to separate out a tracker issue or string issue is connect the string to a different tracker

0 Likes 0 ·
1 Answer
vicens avatar image
vicens answered ·

Todos los grupos de siete paneles cada uno, son independientes?. Van a diferente mppt?

2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

davidtudor avatar image davidtudor commented ·
The go to MPPT 450/100 each with 2 trackers and i have 2 of these so all 4 trackers separate.


0 Likes 0 ·
vicens avatar image vicens davidtudor commented ·

Prueba lo que dice alexandra, haz un intercambio de grupo. Si sigue igual revisa la serie, cableado y conexiones y descartado paneles.

0 Likes 0 ·

Related Resources

Additional resources still need to be added for this topic