This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Under “System Status in VRM” in the “Solar Yield” quadrant/box of the dashboard there is a temperature number listed there.
Where is that temp sourced from?
Directly from MPPT controllers? If so, which one if multiple?
Area temperature based on weather reporting and stated location of site in VRM?
Other?
Thanks.
Hi all, its the temperature for the configured location; provided by a online weather service
;o)
Thank you mvader
@mvader (Victron Energy) Does that only populate when there is a GPS fix?
Nevermind! Did a test... Answer is yes! Manually setting the location doesn't work!
@Ghostrider that is not the case. Manually setting the location in VRM should work. Just checked your instance, and it reports the weather OK for me.
hmm..I had the weather previously set manually and it only showed N/A for the first few days ...then I plugged in a GPS I found and the temperature came alive within minutes. Either way, I'll leave the GPS in place since its nice to have anyway.
