Minimum input current in multiplus 2 48/3000

Question

replit

This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.

question

jeremias asked Aug 12, '24

I have a 500va Phoenix inverter and I want to connect it to the input of the multiplus 2

Multiplus-II

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

125 People are following this question.

Answer 1 · 2024-08-12T14:04:19Z

thesmok answered · Aug 12 at 02:04 PM

My Multiplus II 48/3000/35-32 goes down to 3.5A input current limit. But that value depends on specific model.

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 2 · 2024-08-12T14:15:51Z

victronitnerd answered · Aug 12 at 02:15 PM

I've seen a table somewhere that suggests about 4amps for the 48/3000

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.