question

alf-li avatar image
alf-li asked

How to connect all the cables to start the system?

I'm a novice user.

Please explain to me at the very beginning what is unclear to me.


I have the following equipment:

1x Victron MultiPlus-II 48/5000/70-50 230v

1x Victron Lynx Distributor

1x Victron Cerbo gx control panel

1x Victron gx Touch 50 display panel for Cerbo gx

2x Pylontech us3000c 3.5kWh LiFePO4 battery


I don't have solar panels or a generator yet.

I now need to provide 230 V power to the most necessary consumers during network outages - from batteries. Since we have big problems with electricity (blackouts).

I installed my equipment and now I need to connect everything with cables.

I ask experts, if possible, to give recommendations and advice on step-by-step actions.

Multiplus-IIcerbo gxPylontech
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
nickdb avatar image
nickdb answered ·

@ALF-Li This isn't really what the community is for, that is the role of a professional installer.

If you want to DIY, then you need to have the necessary technical background and to have done the research to skill up.

You can find free video training at professional.victronenergy.com

The wiring unlimited guide has good information, as does the ESS guide and inverter user manual, many have been linked to in the "related resources" section at the top right of this page.


2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.