question

jakecloss avatar image
jakecloss asked

Configure easysolar

Is there any way to configure my easysolar 48/5000 without VE.direct to USB?

VEConfigure 3
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Matthias Lange - DE avatar image
Matthias Lange - DE answered ·

If you have an internet connection at the CCGX you can use Remote VeConfigure via VRM portal to download/upload config files from/to the Multi.

But I would recommend you to update the firmware of the Multi and that can only be done with a MK3.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

JohnC avatar image
JohnC answered ·

You'll need the VE.Direct to usb adaptor to change settings in the mppt, but VRM can manage firmware changes in the mppt without it. And you'll need to pull the existing cable from the mppt to do it.

That's the opposite way round for the Multi, and an 'anomaly' in the system..



2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic