question

jeanclauderuehle avatar image
jeanclauderuehle asked

Cerbo GX WIFI Dongle Setup

I'm using a cerbo gx but the wifi singal to the interne router is to weak to have a stable connection.

To increase the signal strength, I'm using the recommended Victron Wi-Fi dongle, but I can't find any information how to set it up.

The dongle appears on the Cerbo GX Wi-Fi connections as venus-HQ2247..., and I'm able to use it, but I found no way to connect to the existing internet router.

Thanks for your help.

Jean-Claude

cerbo gxwifi
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Alexandra avatar image
Alexandra answered ·

@jeanclaude.ruehle@gmx.ch

It is plug and play.

https://www.victronenergy.com/media/pg/Cerbo_GX/en/internet-connectivity.html#UUID-9d932e2e-f182-1ab9-a574-34c2fffecb9d

The connection to the router is done the same way the internal WiFi is done.

2 comments
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

jeanclauderuehle avatar image jeanclauderuehle commented ·

@Alexandra

Thanks for your answer and means that I have to plug in and do nothing more?

I did it this way but the signal strenght remains the same as before.

Does it mean I plug it in and add it with the shown passphrase as WIFI-connection as I did the connection to the router?

Thanks again for your help.

Regards, Jean-Claude

0 Likes 0 ·
Show more comments

Related Resources