question

marcosvisser avatar image
marcosvisser asked

Message: "open in a larger screen to view remote console"

My Cerbo GX (firmware 3.22) shows the following message on my SIMRAD GO9XSE: "open in a larger screen to view remote console". I never had that problem with firmware 2.91. But I have to update to let the Mopeka sensors communicated with the Cerbo. See pictures below.

Any thoughts on this?

2024-07-31-194438.jpgError message - firmware 3.222024-07-31-212107.jpgFirmware 2.91

remote consolesimrad
2024-07-31-194438.jpg (3.3 MiB)
2024-07-31-212107.jpg (3.7 MiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Matthias Lange - DE avatar image
Matthias Lange - DE answered ·

Did you try to update to the last version 3.41 (released yesterday)?

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

marcosvisser avatar image
marcosvisser answered ·

Hi Matthias,

Just installed firmware 3.41. Unfortunately, no succes. Same 'error' notification.20240801-114650.jpgFirmware 3.41

Thing is, that after installation I am not able to access the remote console on my SIMRAD screen and have to go back to firmware 2.91 using my phone.

Hope that someone from VE picks this up.


20240801-114650.jpg (4.7 MiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Remote Console on VRM - Troubleshooting

Additional resources still need to be added for this topic