question

tobe91 avatar image
tobe91 asked

Orion XS input voltage compensation

Hello,

I thought about replacing my Votronic VCC1212-50 booster in my Camper van with an Orion XS 50A.

From what I currently understand the Orion doesn't measure input voltage separately from the main 12v input coming from the starter battery?

Like in the most installations there is at least 4m or more cable between starter battery and the Orion XS. This ends up in a considerable voltage drop and affects the charging efficiency quite strong.

I'm using the Victron SmartShunt where I have the starter battery voltage on the Auxiliary Measurement port of the SmartShunt.

Wouldn't it be possible to forward this information anyhow to the Orion XS to compensate for the voltage drop? So no separate connections would be needed.

Thanks, Tobias

orion xsvoltage drop
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Matthias Lange - DE avatar image
Matthias Lange - DE answered ·

As far as I know is Victron working on a software solution for that.

You enter the cable length and cross section and the Orion can calculate the voltage drop.

1 comment
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

tobe91 avatar image tobe91 commented ·

This sounds really weird from my perspective, topics like cable ambient temperatures and so will all influence the calculations.

This has a smell of that they designed something and forgot something essential and now try to come up with a cheap solution to overcome this.

Why not just use what is already there with the SmartShunt or BatterySense, used by many customers? This would enable a precise information and not something error prone.

0 Likes 0 ·
Guy Stewart (Victron Community Manager) avatar image
Guy Stewart (Victron Community Manager) answered ·

Hi @Tobe91,

The Orion XS supports receiving battery voltage via a Smart Battery Sense, or SmartShunt via a VE.Smart Network (over bluetooth).

For more info on how to set that up please see the VE.Smart Network manual here - https://www.victronenergy.com/media/pg/VE.Smart_Networking/en/ve-smart-networking-product-compatibility.html

10 comments
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

tobe91 avatar image tobe91 commented ·

I read this instruction already, but from what I read the Orion XS only receives the voltage of the battery which it should charge and not the voltage from the vans starter battery or? So the input voltage measurement for the Orion XS is not doable via VE Smart Networking or?

0 Likes 0 ·
Show more comments

Related Resources

Orion XS product page

Orion XS datasheet

Orion XS manual (html)

__________

Additional resources still need to be added for this topic