question

Kevin Riley avatar image
Kevin Riley asked

Victron Victron Energy Wall Mounted Enclosure for BMV or MPPT Control

I recently purchased the Victron wall mounted enclosure for the MPPT Control display. A ve direct cable is used to connect the display to a MPPT 100/30 controller. The enclosure has a port for multiple wires and not the ve direct cable. If I drill out the port enclosure to wire the direct cable to the control display, do I void the warranty on the enclosure ? Everything fits the enclosure and connection to the display device. Thanks for any clarification

victron products
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
klim8skeptic avatar image
klim8skeptic answered ·

@Kevin Riley Looks like you can take the cable clamp out to run the VE Direct cable.

BMV wallbox

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Kevin Riley avatar image Kevin Riley commented ·

@klim8skeptic That's the ticket. Thanks I do notice the VE Direct cable extends out a bit in the back of the enclosure. That may explain why there's a right angled cable connector. I can live with the straight cable for now

0 Likes 0 ·

Related Resources

Additional resources still need to be added for this topic