Hi, Is it possible to trigger equalisation mode from the Venus GX using the ModbusTCP interface? If so, which register is used to initiate EQ mode? I know it's possible using the CCGX.
Thanks.
Rob
asked
Venus GX - Remote Equalisation
Which register is it on CCGX? I am looking at the register map now and can't find a writable register.
There does not appear to be a register for that.
I can see read-only registers for querying status, but no writable registers for triggering an Equalisation cycle.
Hi,
Yes, that's what i thought. I have been through all of the writable registers, but can't see anything relating to Equalisation.
thanks anyway.
Rob
