This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi, a friend had a problem with his invertor in a camper, and i noticed that the battery and loads are all connected to LOAD, and nothing to BATTERY. In The victron app u can see that it is working, and putting power into the battery. Can u wire it like that? A bit weird. The invertor offcourse, is directly connected to the battery
It should not be wired that way. The load port output is also limited.
Also check the panel wiring carefully. Red and black are reversed, which points to more problems. Anyone disconnecting the panel connections is likely to reverse them on reconnection and blow the controller.
