This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi
i very intermittently get Phase Missing fault, this is a 3 phase system with 3 slaves also, Multiplus ii 5kva, all exactly same units all on same software.
I lose electric for a small amount of time and then boots back up, sometimes happens after generator has been charging and then stops as the charging is up to level.
Have you physically see which phase it is that is doing it? That usually narrows down where the issue is.
HI
no, I haven't I presume it will show you by the lights on front, the problem is its so quick at restoring, I cant catch it, one thought I had was to put CCTV camera in there pointing at the Multiplus?
Hi Alexandra
if i found which unit is faulting, what do i do then?
