Hello
Is it possible to see the Buck-Boost via Bluetooth or via a Cerbo ?
Can we use a MK3 or any other method other than a personal computer with TS Config.
The best will be to use the application Victron Connect.
Thanks !
Nils
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hello
Is it possible to see the Buck-Boost via Bluetooth or via a Cerbo ?
Can we use a MK3 or any other method other than a personal computer with TS Config.
The best will be to use the application Victron Connect.
Thanks !
Nils
If you mean the old Buck-Boost DC-DC converter, no, the only interface is via TSConfig.
If you mean the new Orion XS DC-DC charger (which was briefly called a BuckBoost as well) then yes, via BT (VictronConnect) and also will interface with Cerbo if the Cerbo's Venus OS is up-to-date.
Additional resources still need to be added for this topic
38 People are following this question.
TSConfig template for a Victron Buck Boot 50-amp DC to DC charger for two 24 Volt battery banks
Alternator to Buck Boost to Lithium built-in BMS, marine application.
Monitor current from Buck Boost
TSConfig and Buck Boost DC DC 50A
100A Buck Boost alongside secondary alternator - potential problems?