question

sbuckley avatar image
sbuckley asked

TSConfig template for a Victron Buck Boot 50-amp DC to DC charger for two 24 Volt battery banks

Please can anybody provide an example TSConfig information template for a Victron Buck Boot 50-amp DC to DC charger for two 24 Volt battery banks one lead acid and the other Lithium Ion Phosphate, this would be very much appreciated.

Current config attached

Visio-SnowHillLady Sterling.pdf

buckboosttsconfig
visio-snowhilllady-sterling.pdf (33.4 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
kevgermany avatar image
kevgermany answered ·

The 50A chargers are only available for 12V systems at present.

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

sbuckley avatar image sbuckley commented ·

Buck-Boost DC-DC Converter 25A / 50A / 100A - Victron Energy supports 24 Volt

0 Likes 0 ·
sbuckley avatar image
sbuckley answered ·

The 50amp Buck boost DC /DC charger supports 24Volt

Buck-Boost DC-DC Converter 25A / 50A / 100A - Victron Energy

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

kevgermany avatar image kevgermany ♦♦ commented ·
It's not a charger, it simply provides fixed voltage output. You can use for fixed voltage charging, but it's not recommended and you have to compromise between overcharging your batteries or a low rate of charge. There's only one 50A charger model, and it's 12V in, 12V out.
0 Likes 0 ·

Related Resources

Additional resources still need to be added for this topic