Hi,
I would be grateful if someone could tell me what is the thickness of the Pylontech extra long cables are.
Many Thanks
Tony
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi Tony,
The 2m cables are 25mm2 (4AWG) and according to the user manual they are rated for 120A.
Hi
According to this https://voltaconsolar.com/batteries/lithium-ion/pylontech-battery-cables.html
35mm2. I can't physically check my cables as they are in a remote location. But I am 99% sure that it' correct.
Regards
Mikael
No, sorry, Mikael, it's 25 mm². Which is, by the way, way to thin. I have US2000 and on discharging currents of about 90A, the cables start to become warm.
Means, they seem to be a little undersized for a stack of five US2000, which allows even 125A steady current discharge.
Your dealer put the wrong dimension.
Here is another one (Germany):
https://www.bau-tech.shop/batterie/litium/litium-48v/pylontech-batterieanschlusskabel-set.html?gclid=EAIaIQobChMIo9rHgPOA6QIVEuR3Ch0RGgn6EAYYAiABEgKzcfD_BwE
Victron Pylontech battery compatibility guide
Additional resources still need to be added for this topic
11 People are following this question.